Description
Introducing a fantastic solution for carrying power wheelchairs, mobility scooters, ATVs or just about anything else that will fit inside the parameters of the carrier.
A great alternative to updating your vehicle to enable you to carry your mobility device or ATV.
All you need is a vehicle fitted with a 2″x 2″ (50mm x 50mm) Hayman Reece type pull-out tow bar that has a downward load rating equivalent to the weight of your mobility device and the weight of the carrier (58kgs) combined.
Use the many tie-down points to secure your mobility device to the carrier. (Tie down straps not included)
Note: Some of the pictures are of a model that loads/unloads on the right-hand side, the actual carrier’s ramp folds down on the opposite side to allow for curbside loading.
The carrier features an integrated 2-section ramp that folds up and out into 3 different positions.
The first position keeps the ramp folded upright against the back of the vehicle when not in use. It is secured in position by a spring pin.
The second position allows the ramp to stand up at 90 degrees to the main carrying platform after the mobility scooter or wheelchair has been loaded onto the main platform. The ramp is held vertically in place with a spring pin and a padlock for security.
The third position is the ramp unfolded. This position allows for scooters, power wheelchairs, and just about anything with wheels to be pushed or powered up the ramp.
A welded handle on the ramp allows for easy folding and unfolding.
Tie-down straps can be hooked onto any of the 10 tie-down holes found on the 4 ” sides of the carrier
The rear of the carrier has 2 reflectors for greater visibility at night.
Supporting the carrier is a heavy-duty 50 x50 mm hitch tube and an anti-tilt bracket which features 4 bolts and a safety pin to allow the hitch tube to be removed from the carrier.
The hitch tube has a 5/8” hitch pinhole for securing the carrier to your vehicle
Features:
- Black powder coated finish
- Each carrier includes an extra long 5′ ramp when fully extended
- The entire carrier has the option of tilting upward and locking in the upright position
- Quick release spring loaded pins allow for easy unlocking of the ramp
- Large cutout handles allow easy lifting of the carrier. Each cut-out has a rubber insert for padding.
- Handles also allow easily controlled lifting of the carrier
- Anti-Tilt Device to minimize any left-to-right roll.
- 2 Reflectors Included
- 10 tie-down points
- Sturdy steel construction
