Description
The M2 mattress features firm edge support and high-density foams. This is a high-risk mattress, and suitable for use on all I-Care beds. The M2 Medical Mattress has a wipeable cover with a drip cover and firm edge support.
Pressure Redistribution
XP Light foam is very responsive and microporous material allowing a high level of airflow. This is used in the top layer of the M2 mattress and is module cut to allow each square to move to body contour. This module cutting also allows for horizontal anti shear movement.
Base & Rail Support Foam
XP Support foam is a high-density foam that is used in the bottom layer and side rails of the M2. XP Support foam is an open cell material that breaths to allow air circulation but is high density to prevent bottoming out or side roll out. This material will easily contour to any profiling bed.
Zerotec Cover
Zerotec fabric is a medical barrier fabric that has high elasticity in every direction which reduces shear on pressure redistribution surfaces. It is waterproof and wipeable but has microporous breathable properties. This is used for the cover of the M2 mattress. This cover has welded seams and waterfall flaps for fluid control.
Features:
- No turn design reducing manual handling
- Anti crease XP Support base to allow easy contour for any profiling bed
- Standard cover MVTR: NA. Medical Cover MVTR (g/24h·m2): 1635.0 Average
- Medical Cover BS7175: Crib 5
- Waterlow ≤20
- Immersion Rating: Medium
- Envelopment Score: 4/5
- To launder the cover in a washing machine, set the main wash to a minimum of 65°C for no less than 10 minutes. The cover can be tumble dried on low heat and the temperature must not exceed 60°C. The foam can be autoclaved at 134°C.
